Flexible Support 2 | Inflatable Tent Base for Playdo Rooftop Tents
Upgraded from the original EVA flexible support — designed specifically for Playdo inflatable rooftop tents.
Provides a stable, level foundation for your tent in parking mode. Lightweight, compact storage.
Mounts on roof racks or directly on vehicle roof. For stationary use only.
Flexible Support 2 – Upgraded Inflatable Base for Playdo Rooftop Tents
Flexible Support 2 is the upgraded replacement for our original EVA flexible support — redesigned specifically as a companion base for Playdo inflatable rooftop tents.
It provides a stable, level foundation for your tent when parked — whether mounted on roof racks or placed directly on the vehicle roof. The inflatable airbag system conforms to the roof contour, creating a secure and level mounting surface without rigid pressure points. Weighing under 1.6kg for the main body and packing down to palm size, it‘s easy to carry as a spare or use as a permanent base for your tent setup. The complete airbag set adds just 3kg to your load. Important: Flexible Support 2 is designed for stationary use only — it is not intended for driving with the tent mounted.
-
Purpose-Built for Playdo Tents: Designed exclusively as a companion base for Playdo inflatable rooftop tents — not a standalone cargo carrier.
-
Upgraded from EVA Support: Improved airbag system replaces original EVA foam — better contour conforming, more stable support for tent base.
-
Stationary Use Only: Engineered for parking mode setups. Provides level foundation when mounted — do not drive with tent installed on this base.
-
Quick Setup & Removal: Inflates in minutes with manual pump. Removes just as fast when you‘re ready to pack up.
-
Ultra-Light & Compact: Main body under 1.6kg, packs to 20×16.5×6cm. Airbag set 3kg, packs to 35×30×11cm. Easy to store in trunk.
-
Fits Most Vehicles: Conforms to various roof contours — works with or without roof rails. Adaptable to sedans, SUVs, and hatchbacks.
The Dedicated Base for Your Playdo Tent
Flexible Support 2 is purpose-built for one job: providing a stable, level foundation for Playdo inflatable rooftop tents in parking mode. The upgraded airbag system conforms to your vehicle‘s roof contour, creating a secure mounting surface without rigid pressure points or paint damage. The base sits firm — your tent stays level and stable. At just 1.6kg for the main body and palm-sized storage, it’s the lightest base option available. No heavy roof racks. No complex installation. Just inflate, position, and set up your tent.
Specifications Sheet of Inflatable Roof Rack
| Product Name | Flexible Support 2 |
| Airbag Material | PVC |
| Airbag Size (inflated) | 130 × 25 × 15cm |
| Airbag Set Packed Size | 35 × 30 × 11cm |
| Strap System Packed Size | 20 × 16.5 × 6cm |
| Total Weight (straps + airbags) | 4kg |
| Single Strap Tensile Strength | 1000kg |
| Anchor Points | 4 D-rings |
| Locking Mechanism | Ratchet secondary lock |
| Installation | Tool-free, no drilling |
| Vehicle Compatibility | All models, with or without roof rails |
| Functions | Cargo carrier / Rooftop tent base |
Get Wholesale Pricing for Flexible Support 2
Purpose-built base for Playdo inflatable rooftop tents. Stationary use only.
Share your target quantity, logo requirements, or packaging needs.
We will reply with a competitive B2B quote, sample policy, and lead time.
Advantages of air roof rack
Main body under 1.6kg — pack it anywhere. Airbag set 3kg — fits in a small corner of your trunk.
Use it as a permanent base for your tent, or carry it as a spare for unexpected ground conditions.
When you don’t need it, you barely notice it‘s there.
Flexible Support 2 is designed for one purpose: leveling your Playdo tent when parked.
Do not drive with the tent mounted on this base. It is not engineered for road loads or highway speeds.
Park, set up, camp. That‘s what it‘s built for.
FAQS of air roof rack
Product Installation Instructions
❶ Place the main strap system across your vehicle roof.
❷ Position the two airbags (if using for rooftop tent mounting) or skip to step 4 (if using as cargo carrier).
❸ Inflate the airbags to the recommended pressure (manual pump included, electric pump optional).
❹ Adjust the strap spacing to match your cargo or tent dimensions.
❺ Route the straps through your vehicle‘s door frames (no drilling required).
❻ Tighten using the 4 D-ring anchor points.
❼ Engage the ratchet secondary lock for final tensioning.
❽ Load your cargo or mount your rooftop tent.
❾ To remove: release ratchet locks, deflate airbags (if used), and store in the carry bag.
Related Products
Related News
Rooftop tent sampling is the stage that decides whether your launch lands on time, and it is also the stage […]
Every importer eventually learns this lesson in the expensive way. A customer emails about a cracked ladder bracket, you have […]
Rooftop tent flexible support 2 is the pad that sits between your roof and an inflatable rooftop tent. It gives […]
A bell tent vs inflatable cabin tent comparison usually starts in the wrong place, with floor area. Both give you […]
A soft shell rooftop tent sits in the middle of the market and gets overlooked for it. It is cheaper […]
“How long does production take?” sounds simple, but the real timeline usually starts before production. This matters when a rooftop […]
A rooftop tent can look perfect in a product photo and still create problems after it reaches a customer’s garage. […]
OEM and ODM sound similar in a supplier conversation, but they describe different ways of bringing a rooftop tent to […]
