Original Factory Inflatable Exhibition Canopy – 200g Polyethylene, PVC Air Column, Full‑Color Custom Printing
Inflatable Dome Booth Tent | Portable Exhibition Canopy for Trade Shows & Outdoor Events
Make your brand stand out at trade shows, expos, and outdoor promotions.
Our inflatable dome tent features a pole‑free air column structure, lightweight 200g polyethylene fabric, and full‑color custom printing.
Sets up in minutes, packs down to a compact 86×50×49cm bag.
Perfect for brand activations, photo booths, product displays, and temporary shelters.
Skip image slider
Showing Slide 1 of 9: Exhibition Canopy main01
Original Factory Inflatable Exhibition Canopy – 200g Polyethylene, PVC Air Column, Full Color Custom Printing
Our Fully Inflatable Exhibition Canopy is a self‑developed, patented design that eliminates traditional metal poles entirely.
It uses a sturdy PVC air column system (20cm leg diameter, tapered top diameter 15cm) to create a stable, spacious shelter measuring 6m (L) × 5m (W) × 2.8m (H).
That’s enough interior space to display 1‑2 vehicles, set up a photo booth, or host a brand activation zone.
Ideal for trade show booths, car exhibitions, outdoor product launches, promotional campaigns, sports event shelters, and temporary retail spaces.
- Pole‑Free Inflatable Structure: Replaces heavy metal frames with PVC air columns (20cm leg diameter, tapered top diameter 15cm). No tools, no complex assembly – inflate, stake down, and you‘re ready.
- Fast 3‑5 Minute Setup: Inflates rapidly using a standard manual or electric pump. Deflates just as quickly – ideal for time‑sensitive events and pop‑up promotions.
- Spacious 6×5×2.8m Interior: Open floor area fits 1‑2 cars, a photo booth, or an entire product display. Dome design offers high headroom and excellent airflow.
- Durable 200g Polyethylene + 210D Oxford Fabric: Main canopy uses weather‑resistant 200g PE with UV protection. Upper beam reinforced with 210D checkered Oxford band for added tear strength.
- Compact Portability: Packs into a single 86×50×49cm carry bag (gross weight 42kg). One person can transport and set up – no truck or crew required.
- Full‑Customization Ready: Support heat transfer printing for vivid, fade‑resistant logos and graphics on the canopy. Custom colors and size adjustments available for bulk orders.
Products Categories
Get A Free Quote
The Inflatable Alternative to Heavy Metal Frame Tents – Portable, Eye Catching, and Brand Ready
Traditional trade show tents rely on bulky metal poles that take two people to assemble, require a truck to transport, and still look like every other booth on the floor.
Our inflatable exhibition canopy solves all three problems.
The PVC air column system holds a rigid structure – tested to withstand moderate wind loads. Yet the entire tent packs into a bag the size of a large suitcase.
Setup is a one‑person job: unroll, connect the pump, and watch the canopy rise in minutes.
The 200g polyethylene fabric is UV‑treated and waterproof, keeping your products and staff dry in light rain. The optional air base mat creates a branded floor area that elevates the presentation.
But the real differentiator is the visual impact: a dome‑shaped, pillar‑free inflatable tent draws crowds simply because it looks different.
For B2B buyers, we offer full customization – print your logo, event graphics, or a full‑color wrap across the entire canopy.
The 210D Oxford reinforcement band around the upper beam ensures the tent holds its shape season after season.
Whether you are outfitting a trade show booth, launching a product at a car expo, or running a promotional tour across multiple cities, this inflatable canopy delivers reliable, repeatable performance.
Specifications Sheet of Inflatable Canopy
| Product Name | Inflatable Exhibition Canopy |
| Canopy Fabric | 200g PE |
| Upper Beam | 210D Oxford band |
| Air Column | PVC (leg 20cm, top 15cm) |
| Air Base Mat | PVC brushed cloth |
| Inflation | Pump (sold separately) |
| Open Size | 6×5×2.8m |
| Floor Area | ~30㎡ |
| Capacity | 1‑2 cars / ~20 people |
| Frame | Inflatable (no metal) |
| Package Size | 86×50×49 cm |
| Gross Weight | 42 kg |
| Net Weight | 40.9 kg |
| Package List | canopy + mat + straps + bag |
Get Wholesale Pricing for Custom Inflatable Exhibition Tents
We manufacture these tents in our own factory using proprietary designs.
Share your target quantity (MOQ starts from 1 piece), custom printing artwork, size requirements, or color preferences.
We will reply with a competitive B2B quote, sample policy, and lead time.
Wholesale and bulk orders welcome for trade show organizers, promotional agencies, event rental companies, and brand marketing teams.
Pole Free Inflatable Air Column – Rigid & Stable
Traditional exhibition tents use heavy metal poles – hard to transport and assemble. Our inflatable canopy replaces them with PVC air columns (20cm leg diameter). Inflate to 4‑8 PSI in minutes using any pump. The structure stands firm, tested for moderate wind loads. When the event ends, deflate, roll up, and secure with two buckled straps. Packed size: 86×50×49cm – fits in any car trunk. Lower transport costs, faster setup, no crew needed.
200g Polyethylene + 210D Oxford Reinforcement – Built for Outdoor Durability
Canopy fabric is 200g polyethylene – lightweight, UV‑resistant, and water‑repellent. The upper beam is reinforced with a 210D checkered Oxford band to prevent tearing at high‑stress points. The included PVC air base mat (220×160×15cm) protects the floor from abrasion and offers a clean branded surface. Wipe clean with a damp cloth. With proper care, this tent delivers 3‑5 years of active commercial use.
Inflatable Exhibition Tent FAQS
Q1: What is the difference between your inflatable canopy and a traditional pop up tent?
A: Traditional pop up tents use a heavy metal folding frame – two people, a truck, limited print area. Our inflatable canopy uses lightweight PVC air columns – one person, 3 5 min setup, full color printing across the entire canopy.
Q2: Does the tent require constant air supply to stay inflated?
A: No. The system is sealed – once inflated and the valve closed, it holds air for many hours or even days. A quick top up mid day is sufficient for all day events.
Q3: What is the MOQ for custom logo printing or full color graphics?
A: MOQ is 1 piece – we support single unit custom orders. Full color heat transfer printing available. Bulk orders (≥10 pieces) receive discounted rates.
Q4: What sizes are available? Can you customize dimensions?
A: Standard size: 6×5×2.8m. For bulk orders (≥20 pieces), we can adjust length, width, or height. Please provide your requirements.
Q5: What is the tent‘s waterproof rating? Can it be used in rain?
A: The 200g PE fabric is water repellent for light to moderate rain. For heavy rain, we recommend additional waterproof treatment or sidewalls (available on request).
Q6: Does the pump come included?
A: Pump is sold separately. We can supply manual pumps (cost effective) or electric pumps (faster). Please specify your preference.
Q7: What is the packed size and weight per unit? How many fit in a container?
A: Packed: 86×50×49cm, 42kg. Loading: 20‘ container – 18 20 units; 40’ – 38 42 units.
Q8: What is your warranty policy?
A: 12 months against manufacturing defects (seams, valves, fabric). Wear and tear, punctures, improper inflation not covered. Spare repair kits available.
Q9: Can this tent be used on sand, grass, or asphalt?
A: Yes. Soft ground: use included pegs. Hard surfaces: use sandbags or weights (not included). Do not hammer pegs into asphalt/concrete.
Q10: What is the lead time for a single custom printed tent?
A: 10 15 business days after artwork approval. Standard (non printed) units may have stock – please inquire. Rush orders available for extra fee.
Product Installation Instructions (One Person, 3 5 Minutes)
- Remove the tent and air base mat from the carry bag.
- Lay the deflated tent flat on a clean, level surface.
- Attach a manual or electric pump (not included) to the PVC air column valve.
- Inflate until the air column is firm (approx. 4‑8 PSI). Do not over‑inflate.
- Ensure the 210D Oxford reinforced band sits evenly around the upper beam.
- Position the tent. Stake down the four corners using included ground pegs (soft ground) or use sandbags/weights (hard surfaces).
- Attach windbreak ropes to side anchoring points for added stability.
- Place the air base mat inside the tent floor.
- To deflate: open valve, press out air, roll tent, secure with two buckled straps.
- Pack everything back into the 86×50×49cm carry bag.
Related Products
Related News
A rooftop tent warranty is the part of the buying decision nobody reads until something breaks. Yet it is one […]
A backyard inflatable tent is the fastest way to make a normal weekend feel like a trip — without fuel, […]
A solid rooftop tent packing list is the difference between a relaxing weekend and a 9 p.m. run to the […]
You zip up dry, wake up to drips on the ceiling. Condensation is the number-one comfort complaint in any tent […]
Every camper faces the same fork: sleep on the roof or on the ground? Both keep the rain off, but […]
If you run trade shows, product launches, or pop-up promotions, you know the pain: metal-frame tents need two people, a […]
Glamping is no longer a niche. Travelers increasingly want the romance of camping with the comfort of a hotel — and […]
If you have been shopping for a rooftop tent, you have probably hit the same fork in the road: inflatable […]
